Repair times can vary depending on the issue and parts availability, but we strive to complete most repairs within 3-10 business days.

Yes, we offer warranties on all our repairs, It depends on your choice of parts. On cheaper Chinese parts we only warranty for 10 days. On Mouser or Digikey parts will be 90 days but it depends on the damage that has to be fixed. Please contact us for specific warranty details. We will work with you on any problems. 

If you want your music to be loud, amplifiers are definitely part of the picture. But whether you run your system wide open or softly enough for conversation, a power amplifier will breathe life into your music, bringing out all of its excitement and detail. Here are a few of the main benefits of adding a car audio amplifier:

Better sound quality — Adding an amplifier gives you a clean power source that can drive your speakers without straining. Your music will sound cleaner and more defined at all volume levels.

Power for upgraded speakers — High-quality aftermarket speakers or component systems may require more power for peak performance than your in-dash stereo can provide. An amplifier will give them the power they need for optimum sound.

Powering a subwoofer — Subwoofers require significantly more power than a brand-name or factory in-dash receiver can provide. A separate amp is a necessity.

We specialize in repairing a wide range of brands, including but not limited to Rockford, JL, MTX, Lanzar, Sundown, Kicker, Powerus, Skar, and many more.

When building a system from scratch, one of the first questions you should ask yourself is, "How loud do I want this to be?" Car audio systems don't necessarily need massive amounts of amp wattage to sound loud, but having a lot of power available is good for the "headroom" of a system — the ability to deliver an emotionally impactful burst when the music asks for one. There's also the interior size of your vehicle to consider.

Small vehicles or factory speakers – 45-50 watts

If you drive a compact coupe or hatchback, a sports car, or a small-cab pickup, then an amp that's 50-watts RMS per channel or smaller will probably do fine, overcoming road noises and adding clarity to your music. If you still have the factory speakers, 45 or 50 watts is about as much power as you should use. When you're ready to upgrade, look for speakers with a top RMS rating of at least 50 watts RMS to go along with the amp.

Larger vehicles or you like it loud – 75 watts

For larger vehicles and for those who just want more volume, you should step up to at least 75 watts RMS per channel. A difference of 5 or 10 watts either way won't make any difference and probably can't even be heard. Matching speakers will need to each have a top RMS rating of 75 watts RMS or more.

Going where others fear to tread – 100 watts

Those of you who want even greater impact and eye-popping volume out of your audio system will want an amp with 100 watts RMS or more per channel. Get speakers or component sets that are each rated for at least the top RMS output power of each channel.

All aftermarket speakers, especially component sets (separate woofers and tweeters), benefit from being fed more power than what a factory or even an aftermarket stereo can deliver.

Among a speaker's published specifications you will find its RMS (or "continuous") power rating, usually as a range — "5-60 watts RMS power range" for example. The higher number represents the approximate driving power at which the speaker will play at its fullest and best according to the manufacturer.

Do not exceed the RMS power ratings

We alluded to this rule in the section above, but it's important to not overpower your speakers.

• For your speakers, use an amplifier whose top RMS output per channel is no higher than each speaker's top RMS rating.
• For your amplifier, get speakers with top RMS ratings that are equal to or higher than each amp channel's top RMS output.

So, if you already have aftermarket speakers, find out their top RMS rating. If your front and rear pairs have slightly different power ratings, it's okay — use the lower rating.

You want the bass to musically blend and be well-balanced with the rest of your system. Here's a good rule-of-thumb guide to subwoofer power:

• If your speakers are powered by your car's factory stereo — 50 to 200 watts RMS of power for the bass will do nicely.
• An aftermarket receiver — you might want 200 to 300 watts RMS of power for your sub.
• Amplified speakers with around 50 watts RMS per channel — plan on 250 to 500 watts RMS for bass.
• A 100 watts RMS or higher per channel system — you'll want at least 1,000 watts RMS for your subs.

As with speakers, you'll need to make sure your subwoofer's top RMS rating is equal to or greater than the amp's top RMS output.

You'll also need to "impedance match" your subwoofer and amplifier. It would be a shame and a waste of money to buy a couple of subs and an amp only to find out that the amp can't run the subs because wired together, their impedance would be too low for the amp to run without overheating. Read our article about Matching Subs and Amps for a detailed explanation about this topic.

Expert tip: If you're adding a sub to a factory system, get a subwoofer amp with speaker-level inputs, so it can get its signal from the factory speaker wires.

Each "channel" of an amplifier is a discrete source of power, intended to power one speaker. How many channels you need depends on your plans for your audio system now and in the future. 

I'm only powering my speakers

Many people like their music with a strong front stage and don't even use rear speakers. A 2-channel amplifier will be the practical solution when you only need to power a single pair of speakers. But if you like rear-fill sound in your car and want to retain front-to-rear fade control, get a 4-channel amp — one channel for each speaker.

I want to power speakers and a subwoofer

There are some other amp configurations to consider when you want to include a subwoofer in your system. A 3-channel amp can take care of a single pair of speakers plus a sub quite effectively.

Most people choose to use a 4-channel amp to run a pair of speakers and a sub — two channels to drive the speakers and the other two bridged together to run the sub. This gives you the option for future expansion of your system. Later on, you could use the 4-channel amp to run four speakers and add a separate amp for the subwoofer.

You may want to consider a 5-channel amplifier that can power your entire system from one convenient and compact package. It's four channels for your speakers, plus a fifth, higher-powered channel for your subwoofer. 6- and 8-channel amps take that all-in-one design and add even more system-building flexibility. 

I only need an amp for a subwoofer

Bass is much harder to amplify than the rest of the spectrum of sound — that's why there are so many large and beefy subwoofer amplifiers out there dedicated solely to reproducing bass.

"Mono," or single-channel, amps are designed for subwoofers. They'll work with a wide range of impedances, and have tone controls and filters specifically made to help reproduce bass. Although many 2- and 4-channel amps can be bridged to increase their power enough to run a sub, they often then can't handle low-impedance subs and will overheat or go into protect mode.

Two common questions are, "Will this work in my car? And if so, how do I wire it in?" If you already have an aftermarket receiver, adding an amplifier is a pretty straight-forward process. You use RCA cables from the receiver to the amp, speaker wire from the amp outputs to the car's speaker wiring, and amplifier power and ground cables to the car's battery and chassis.

However, many cars today have built-in multi-function stereos that are impossible to replace, or factory amplifiers that may or may not be able to be bypassed or replaced. What's often needed is some sort of interface device, like a line output converter or digital signal processor, to reduce powered factory signals down to manageable levels, and process factory EQ'd signals to achieve the over-all tone and impact you want in your music.

Some amplifiers feature high-level inputs with signal mixing and digital processing built in, to help integrate the amp into almost any kind of car stereo system. But for some vehicles, that's still not enough, and an amplifier replacement interface module and vehicle-specific T-harness will be necessary in order to add an aftermarket amplifier and retain your vehicle's system controls and other functions.

Give us a call before you buy your amplifier so one of our Advisors can help you figure out what you'll need to install the amp in your vehicle.